Wax Coating
DESCRIPTION Wax Coating is a combination of the most state-of-the-art, highly effective, wax-based agents. The adherent, elastic and transparent protective film offers outstanding, reliable, long-term protection for inside and outside storage.-
PROPERTIES
- outstanding corrosion protection
- resistant to salt water and corrosive environments
- permanently elastic
- extremely adherent and compatible with lubricants
- markings remain visible
- economical due to low consumption
TECHNICAL DATA
Basis: wax/solvents
Appearance: light brown/clear
Film thickness: 15 - 50 Pm
Propellant: Propane/butane
Density at 20 ¡ãC: 0.69 g/cm3
APPLICATION The outstanding protective properties of Wax Coating offer a wide range of applications for inside and outside storage as well as for the transport and dispatch of machines and metal components. The thin coating does not impair any subsequent welding work. Normal handling is possible soon after the non-oils-based film has been applied.
INSTRUCTIONS Shake can well before use and apply by spraying. The coating thickness is between 15 Pm and 50 Pm depending on environmental conditions. Apply to clean, dry surfaces. Apply several coats to increase protection against corrosion.
The contents of the can should be at room temperature during application. When spraying in enclosed spaces, make sure that there is sufficient ventilation.
After use, clear spray nozzle by inverting the can and spraying until only the propellant emerges.
PACK SIZE Wax Coating 300 ml Part No. 3311
|
